Photoelectric Smoke Alarm: 240V Wired Interconnection (10YR Lithium Battery Back-up)

The Emerald Planet (EP-HW-240-Li10) Photoelectric Smoke Alarm is powered by a 240V mains power and supported by a 10YR Lithium battery back-up.

This alarm can be stand-alone or can be connected (hardwired) with up to 12 alarms on one circuit. This allows all smoke alarms on the circuit to activate simultaneously. 

The alarm is fitted with a test/hush/silence button to facilitate testing of the alarm. The silence function allows the alarm/system to be silenced in the case of a false alarm. Silencing one alarm will silence all connected alarms. 

Designed to meet the rigorous new Australian smoke alarm standards (AS3786: 2014).

Characteristic 
Model Number EP-HW-240-Li10
Normal Operating & Storage Temperature 0oC to 40oC
Dimensions 125mm diameter, 40mm deep
Weight 190g
Power 240V, with 10yr 9V Lithium battery back-up
Sensor Photoelectric optical chamber
Alarm Volume >85dB(A) at 3m
Interconnect Hardwire interconnection. Up to 12 units per circuit
LED Status Active: Small red flash every 40 secs
  Alarm: Rapid red flash with alarm
Normal Operating & Storage Humidity 15% to 95% relative humidity (non condensing)
Includes Screws, mounting plate & interconnection wires
Warranty 5 years

 

Downloads

Product Information

Emerald Planet has been working at the forefront of the environmental market since 2006. Emerald Planet was originally founded with the vision to reduce greenhouse gas emissions by utilising energy efficient products. Emerald Planet was involved with the NSW greenhouse Gas Abatement scheme (GGAS) from 2006 and partnered in the giveaway and installation of over 15 million CFL globes across NSW to December 2008.

© Emerald Planet Environmental Pty Limited
ABN: 84 134 475 522